1. Check the connection of the battery cell of the forklift battery and the battery power output line to ensure that the battery is well connected and the current output is not blocked.

　　2. Before disconnecting the forklift gel battery from the charger, first check the display of the charger and the history of the charger. If an error message is displayed on the charger panel, it is usually that the battery is not fully charged. After confirming that the charging is normal, record the charging time of the charger, the output capacity and the average cell voltage at the end of charging, and disconnect the battery from the charger.webcam factory

　　3. Before inserting the plug of the forklift battery into the power socket of the forklift electrical appliance, first check whether the electrolyte level in each battery cell is within the standard range. If the electrolyte level is low, add distilled water. Scope of application (generally the liquid level of the electrolyte needs to cover the electrode plate by 10-15mm. If possible, you can use the battery's automatic water replenishment system to ensure that the water is at the correct level each time.) After filling up the liquid, connect the battery to On the power socket of the forklift.

　　4. Clean the dust on the surface of the colloidal battery of the forklift, prevent the surface of the colloidal battery from forming a discharge circuit, and shorten the discharge time of the colloidal battery. However, do not rinse with water, just wipe it with a clean cloth.