1. Environmental requirements

　　If the gel battery cannot meet the specified environmental requirements, the battery life will be greatly affected. The reason for the increase of the internal chemical activity of the battery is that the increase of the ambient temperature will also produce a large amount of heat energy, and at the same time, the increase of the ambient temperature will lead to a vicious cycle inside the battery, which will accelerate the shortening of the battery life. by default. The float voltage and discharge voltage in the gel power supply have been adjusted to the default values in the factory, but in different environments, the discharge current of the gel battery increases with the increase of the load. During operation, we must also adjust the load appropriately according to the environment, such as controlling the number of electronic devices such as microcomputers. At the same time, the consumption should generally not exceed 60% of the rated load of the colloid.

　　2. Charge and discharge requirements

　　At the same time, the gel battery is connected to the power source for a long time. In an environment where the power supply quality is high and the mains failure rarely occurs, the battery will be in a floating charging state for a long time. Over time, the activity of the battery's chemical energy and electrical energy conversion will decrease, and the aging will accelerate, thereby shortening the service life. Therefore, it should be completely discharged every 2-3 months, and the discharge time can be determined according to the capacity and load of the battery. After discharge at full load, charge it for more than 8 hours as required.